Oil country lathes
OCL225 Engine type oil country lathe, spindle bore diameter 225mm


Parameters Unit OCL225X1000
Max. processing taper 1:4
Swing over bed mm 630
Range of outside diameters of pipes mm 50-220
Max. length of shaft workpiece mm 1000
Width of bed mm 600
Max. stroke of taper bar mm 750
Spindle
Spindle bore mm 225
Speed steps of spindle 12
Speed range of spindle r/min 20-460
Feeding system
Range of longitudinal feeds mm/r 0.1-1.46, 32 kinds
Range of cross feeds mm/r 0.04-0.65, 32 kinds
Metric threads mm 1-15, 21 pitches
Threads per inch T.P.I. 1-14, 26 pitches
Rapid longitudinal moving speed of carriage m/min 2.5
Carriage travel when turning by one scale with the handwheel on the slide box mm 0.2
Toolpost
Max. stroke of toolpost mm 200
Sectional size of tool shank mm 30x30
Toolpost's rotary angle ±90°
Toolpost travel when turning by one scale with the handwheel on the top slide mm 0.05
Toolpost travel when turning by one scale with the handwheel on the cross slide mm 0.05
Distance between spindle center and toolpost's mounting datum mm 30
Tailstock
Diameter of tailstock quill mm 100
Travel of tailstock quill mm 250
Taper of tailstock quill MT#5
Cross travel of tailstock mm ±15
Power system
Gear pump belt 1-A800
Fast speed motor 2AOS5632  0.37KW  2700 r/min
Main motor belt 4-B2240
Clamp motor r/min 1.5KW  2860 r/min
Coolant pump & motor 0.125KW 22L/min
Gear pump r/min CB-B6  2.5MPa  1450 r/min
Gear pump belt 1-0800
Main motor r/min 11KW  1460 r/min
Outline size
Length  mm 3300
Width  mm 1450
Height  mm 1500
Weight (not include bracket, chuck) kg 5600

Online Message
Skype