Hydraulic slotting machine, max. slotting length 500mm

  1. This hydraulic sloting machine is widely used to machine flat surfaces, mould surfaces (including arc surfaces), key slots in tapered holes, key slots in cylindrical holes, splines, squre holes and polygonal holes on parts. It can also slot parts set to an inclination angle in the range of 0 10 Degrees. This hydraulic slotting machine is espeically suitable for machining key slots in blind holes or holes with shoulders (i. E., stepped holes). This hydraulic slotting machine is popularly operated in the single-piece or small-batch production in workshops;
  2. The worktable on this hydraulic slotting machine feeds in three directions- the longitudinal direction, the cross direction and the rotary direction thus the multiple surfaces on a workpiece can be machined in one single setup of the workpiece;
  3. The slotting ram's reciprocation is driven by a hydraulic cylinder and the hydraulic transmission mechanism. The ram keeps a constant speed in every travel to perform stable slottings and its speeds and the worktable feeding speeds can be steplessly adjusted.
  4. The hydraulic control console has the direction-changing mechanism to reciprocate the ram's motion. The worktable can be moved both hydraulically and manually. The worktable can also be automatically fed and perform rapid trasverse driven by a special electromotor on this hydraulic slotting machine.
  5. This slotting machine integrates the advantages of the mechanical control & drive, the electrical control & drive, the hydraulic control & drive to perform very convenient and easy operations.


Specifications SM500YE  Unit
Max. stroke length of ram 500 mm
Min. stroke length of ram 125 mm
Max. slotting length 500 mm
Distance of vertical adjust of ram 430 mm
Extreme high speed for work stroke of ram 22 m/min
Extreme low speed for work stroke of ram 3 m/min
Speed ratio of work stroke and return stroke of ram 1:1.45  
Speed adjust for work stroke Stepless  
Max. slotting force 19.6 KN
Distance from tool holding surface to column front 1032 mm
Distance from worktable surface to underside of slide rack 740 mm
Max. longitudinal travel  of  worktable 1235 mm
Max. transverse travel of worktable 820 mm
Diameter of worktable φ900 mm
Inclination of ram 0 - 10 Degrees
Range of longitudinal feed (stepless) 0 - 0.6 mm
Range of cross feed (stepless) 0 - 1.36 mm
Range of rotary feed (stepless) 0 - 1°15' Degrees
Max loading weight on worktable 2000 kg
T-slot width in the center of worktable 22H8 mm
main motor 11 KW
coolant pump motor 0.04 KW
Net weight (approx) 11000 kg
Dimensions of machine tool (L x W x H) 3460 x 2130 x 3720 mm


Online Message
Skype